INGUN Part Number
The logical constellation of the INGUN Part No. allows clear identification and recognition of the Test Probes . The individual numbers define the Series, Material, Tip-Style and Diameter, Spring Force and Assembly Conditions (i.e. grid etc.). Within the series, the various combination possibilities are described on each data sheet.
After choosing the individual components, the Order No. of the Test Probe can be derived using the following system:
| 1 | Type of Product | E = E-Type Probe GKS = Standard Test Probe HFS = High-frequency Probe HSS = High-current Probe HMS = Stroke-measuring Probe PKS = Pneumatic Probe SKS = Switching Probe KS = Receptacle | ||
| 2 | Series | |||
| 3 | Tip Material | 0 = Delrin 1 = Brass 2 = Steel 3 = BeCu (Beryllium - Copper) | ||
| 4 | Tip Style | (see overview) | ||
| 5 | Tip Diameter | in mm/100 (e.g. 090 = 0.9mm) | ||
| 6 | Tip Plating | A = Gold G = Aurun N = Nickel R = Rhodium | ||
| 7 | Spring Force | in N ( Newton )/10 (e.g. 20 = 2.0N) | ||
| 8 | Collar Height | Collar Height of the Barrel in mm 00 = no Collar | ||
| 9 | Special Designation (e.g. “C” = heat-proof) | |||